No products in the cart.
1806-2300 kv high efficiency efficient brushless motor . Autobotix race esc with BLHeli 13.2 firmware with oneshot125 Specification Model: h1806-6 KV: 2400 Weight: Approx. 20g (depends on the cable length and prop mount) Prop Shaft Diameter: 4mm (prop adapter is required if the prop is 5mm type) Stator Diameter: 18mm Stator Length: 6mm Shaft Diameter: 2mm Motor Dimensions: _Ì_23x18.5mm Max Continuous Current: Approx. 12A Max. Continuous Power: Approx. 85W ldle Current: 0.2A Internal Resistance: 325m Suitable ESC: 10-15A Suitable Battery: 2-3S Li-Po, 4s with 5 inch prop 10A ESC is OK if you use a 5030 Prop. However, if you use 5045, 6020, 6030, 6045 etc larger props you might need a 12A – 15A ESC to avoid over-driving the ESC (will result burn of ESC if it is over-current). Package Included 4 x RCX 1806-6 2400KV Micro Outrunner Brushless Motor 4 x Set of Prop Mount (T-Type & Standard) Our own custom Autobotix 12a ( 22a burst ) 4S Race Class ESC for specifically for multirotors and built on Atmel processor. This is a stable and reliable 18x12x8cm ESC featuring Quality N-fet outputs 1.5a BEC ( we recommend for powering 5v led systems ) Fast switching drivers External oscillator for stability at all temperatures Bootloader enabled for easy firmware updates BLHeli 13.2 firmware with oneshot125 9cm long upgraded 18AWG silicon power wire 7cm long 20AWG silicon output wires ( bare ) 18cm long signal 3 wire