We ship using USPS and Canada Post

Controller – Naze32 Acro Rev5 controller Naze 32

USD $17.70

The dependable Old Faithful Rev5 Naze32 6050. The last revision of the Naze32 boards that just work.

In stock

SKU: NAZE32_REV5 Category: Tags: , ,

Description

The Naze32 Rev5 flight controller with 6050 gyro is used to fly multi-rotor craft and fixed wing craft and the REV5 version is known to be the most stable and reliable flight controller available. At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze 32 is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.

Features:
• Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Hex/Camera Gimbal. (Default is Quad-X)
• Up to 8 ch RC input – supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
• Built in FrSky telemetry inverter (shared w/main port)
• Battery voltage monitoring
• Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
• Onboard MicroUSB for setup and configuration
• LEDs so bright, they could blind you
• MultiWii-based configuration software for easy setup
rev5 hardware

Specs:
36×36 mm (30.5mm Mounting)
5.3 grams (no headers, 7.3 grams with)
2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6050)
Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line

Included:
Naze32 rev5
2×5 pin header
12×2 pin header – straight header option (break it into 4 2×3 for motors/telemetry pins) OR
3×6 right angle header and 2×3 right angle header – right angle option
1x RC breakout cable

For a list of features, changes and some discussion please review the thread on MultiWii forums and consult the documenation. http://www.multiwii.com/forum/viewtopic.php?f=23&t=5149 Specs: 36×36 mm (30.5mm Mounting)5.3 grams (no headers, 7.3 grams with)2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6050)Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line Included: autobot Cleanflight controller2x5 pin header12x2 pin header – straight header option (break it into 4 2×3 for motors/telemetry pins) OR3x6 right angle header and 2×3 right angle header – right angle option1x RC breakout cable, build log Setup an RX Satellite receiver


Additional Information
Weight 10 g

Reviews (0)

Reviews


There are no reviews yet.

Be the first to review “Controller – Naze32 Acro Rev5 controller Naze 32”