Motor Cobra CM-2208/20 MULTIROTOR MOTOR, KV=2000

Motor Cobra CM-2208/20 MULTIROTOR MOTOR, KV=2000 only $18.99

An amazing motor for 6 inch builds and 5s batteries. Since these motors are typically soldered directly to the speed controller to save weight, the 2208 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.The CM-2208 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provide a solid attachment for your propellers that will not loosen up and slip during use.Included with every Cobra CM-2208 Series Motor is a complete accessory package which contains the following items:

• Four M3x5mm Motor Mount Screws
• Four M3 Flat Washers
• Machined Aluminum Prop Washer
• Locking Prop Nut with Nylon Insert

Cobra CM-2208/20 Motor Specifications

• Stator Diameter 22.0 mm (0.866 in)
• Stator Thickness 8.0 mm (0.315 in)
• Number of Stator Slots 12
• Number of Magnet Poles 14
• Motor Wind 20 Turn Delta
• Motor Kv Value 2000 RPM per Volt
• No Load Current (Io) 0.77 Amps @ 10 Volts
• Motor Resistance (Rm) per Phase 0.114 Ohms
• Motor Resistance (Rm) Phase to Phase 0.076 Ohms
• Maximum Continuous Current 20 Amps
• Max Continuous Power (2-cell Li-Po) 150 Watts
• Max Continuous Power (3-cell Li-Po) 220 Watts
• Motor Weight 44.2 grams (1.56 oz.)
• Outside Diameter 27.7 mm (1.091 in.)
• Motor Shaft Diameter 3.00 mm (0.118 in.)
• Prop Shaft Diameter 5.00 mm (0.197 in.)
• Motor Body Length 24.0 mm (0.945 in.)
• Overall Shaft Length 45.2 mm (1.780 in.)
• Motor Timing 5-10 degrees
• PWM Frequency 8 KHz