We ship using USPS and Canada Post

Motor Cobra CM-2204/32 MULTIROTOR MOTOR, KV=1960

The Cobra CM-2204 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.

In stock

SKU: CM-2204-1960 Category:


Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.
The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.Included with every Cobra CM-2204 Series Motor is a complete accessory package which contains the following items:

  •  Four M3x5mm Motor Mount Screws
  • Four M3 Flat Washers ? Machined Aluminum Prop Washer
  • Locking Prop Nut with Nylon Insert

Cobra CM-2204/32 Motor Specifications

  • Stator Diameter 22.0 mm (0.866 in)
  • Stator Thickness 4.0 mm (0.157 in)
  • Number of Stator Slots 12
  • Number of Magnet Poles 14
  • Motor Wind 32 Turn Delta
  • Motor Kv Value 1960 RPM per Volt
  • No Load Current (Io) 0.58 Amps @ 8 Volts
  • Motor Resistance (Rm) per Phase 0.153 Ohms
  • Motor Resistance (Rm) Phase to Phase 0.102 Ohms
  • Maximum Continuous Current 13 Amps
  • Max Continuous Power (2-cell Li-Po) 90 Watts Max Continuous Power (3-cell Li-Po) 140 Watts
  • Motor Weight 24.6 grams (0.87 oz.)
  • Outside Diameter 27.0 mm (1.063 in.)
  • Motor Shaft Diameter 3.00 mm (0.118 in.) p
  • Prop Shaft Diameter 5.00 mm (0.197 in.)
  • Motor Body Length 14.2 mm (0.559 in.)
  • Overall Shaft Length 32.5 mm (1.146 in.)
  • Motor Timing 5-10 degrees
  • PWM Frequency 8 KHz

Additional Information
Weight 50 g

Reviews (0)


There are no reviews yet.

Be the first to review “Motor Cobra CM-2204/32 MULTIROTOR MOTOR, KV=1960”