We ship using USPS and Canada Post

Controller – MiniAPM 2.6 V3.1 ArduPilot Mega Controller 35x35mm 30.5 mount holes

USD $39.00

We love our little MiniAPM, but be aware, this is not a noob controller. Be sure to have the knowledge necessary to setup this advanced controller.

Only 2 left in stock


Description

Advanced users only

Standard Features: Use APM firmware and ground station. No onboard compass, which makes this version ideal for use with multicopters and rovers 8CH output and 8CH input Can connect to external GPS, compass, telemetry system and PM module 12CH function interface MATCHING GPS AVAILABLE — Caution, most GPS units are not the required 30.5 mm mounting and do not align properly with the controller board. ours has been setup and tested to be plug and play after you determine correct orientation! Recommended modifications Reinforce cable and USB connectors with 5 min epoxy. Greatly reduce potential shock to the board during higher impact situations greatly reducing the possibility of ripping the usb or connectors from the board. You can even slightly embed the controller in the case. You should not need to directly access the board in the future after it is set up and working once. Drill and tap with 3MM the case allowing straight through mounting option using the case as a threaded nut for mounting the controller. Above diagram is incorrect. The true 2.6 version does not have the compass ( small black square to right ) and so it is not necessary to cut JP1 downlaod manual here

Specification:

  • Weight (FC): Approx. 7g
  • Weight (FC w/ Case): Approx. 14g
  • Dimension: 35x35mm
  • Screw Holes (Center to Center) 30mm / M3

Full cable set is included Mini case included


Additional Information
Weight 10 g

Reviews (0)

Reviews


There are no reviews yet.

Be the first to review “Controller – MiniAPM 2.6 V3.1 ArduPilot Mega Controller 35x35mm 30.5 mount holes”